Q250

กล้องวงจรปิดชนิดเครือข่าย IP Camera 3MP Train Application In-Wall Box with D/N, Extreme WDR, SLLS, M12 connector, Fixed lens, f2.5mm/F2.2 (HOV:108.6°), H.264, 1080p/60fps, 2D+3D DNR, Built-in Microphone, MicroSDHC/MicroSDXC, PoE, IP68, IK10(metal casing) , IEC60571, DI, Built-in Analytics

Device

Product Type In-Wall Box
Maximum Resolution 3MP
Product Application Train Application
Application Environment Outdoor
Image Sensor Progressive Scan CMOS
Sensor Size 1/2.8 "
Effective Pixels 2065(H) X 1553(V) (3.21 MP)
Day / Night Yes
Low Light Sensitivity Superior
Minimum Illumination Color: 0.1 lux at F2.2 (30 IRE , 2400 K); B/W: 0.05 lux at F2.2 (30 IRE, 2400 K)
Color to B/W Switch ISP based switch, configurable
Mechanical IR Cut Filter Yes
IR Sensitivity Range 700-1100nm
IR LED No
Electronic Shutter 1/5-1/16000second (manual mode); 1/5-1/16000second (auto mode)
Horizontal Resolution (TV Lines) 1300 TVL
S/N Ratio 56 dB

Lens

Focal Length Fixed focal, f2.5mm
Aperture F2.2
Iris Fixed iris
Focus Fixed focus
Lens Mount Board mount
Horizontal Viewing Angle 108.6°
Vertical Viewing Angle 82.1°

Video

Compression H.264 (Baseline/ Main/ High profile), MJPEG
Maximum Frame Rate vs. Resolution 30 fps at 2048 x 1536
60 fps at 1920 x 1080
60 fps at 1280 x 720
30 fps at 800 x 600
30 fps at 640 x 480
30 fps at 320 x 240
Multi-Streaming Simultaneous triple streams based on three configurations
Bit Rate 128Kbps - 12Mbps (per stream)
Bit Rate Mode Constant, Variable
Wide Dynamic Range Extreme WDR (145 dB)
Image Enhancement White Balance, Brightness, Contrast, Sharpness, Automatic gain control, Flickerless, Defogging
Digital Noise Reduction 2D + 3D DNR
Privacy Mask 4 configurable regions
Text Overlay Yes
Built-in Analytics Object Based Motion Detection, Tampering Detection, Shock Detection, Object Line Crossing Detection, Object Enter Area Detection, Missing Object Detection, Unattended Object Detection, Object Loitering Detection
Server-based Analytics Object Line Counting, People Counting, Face Detection, Object Based Motion Detection, Tamper, Object Line Crossing Detection, Object Enter Area Detection, Missing Object Detection, Unattended Object Detection, Smoke Detection, Heat Map, Dwell Time, Direction Detection, Automatic License Plate Recognition, People Queue Detection, (Require PC-based or standalone IVS or ALPR Server. Contact ACTi support for recommendations on how to maximize analytical accuracy)
Image Orientation Flip, Mirror
IVS performance Certain algorithms may require more computing power, which may limit the number of algorithms that can be concurrently used in the camera. Please test the actual performance before using in a project.

Audio

Audio Type 1-way, Built-in Microphone
Audio Compression 8 kHz, 16 bit encoding, Mono, PCM, G.711

Network

Network Protocol & Service IPv4/v6, TCP, UDP, DHCP, PPPoE, HTTP, HTTPS, DNS, DDNS, NTP, RTP, RTSP, RTCP, SMTP, FTP, IGMP, ICMP, ARP, Bonjour, UPnP, QoS, SNMP, IEEE 802.1X
Ethernet Port 1 x M12 connector (female, D-coding, 4-pin, PoE Type A)
Security IP address filtering, HTTPS encryption, Password protected user level, Anonymous login, IEEE 802.1X network access control

Video Analytics

Analysis Source Type Video
Metadata Accuracy Standard

Event

Event Trigger Video motion detection (10 regions), External device through digital input, Sound detection, Intelligent event detection
Event Response Notify control center, Change camera settings, Command other devices, E-mail notification with snapshots, Push notification to mobile device, Save video to local storage, Save video or snapshot to local storage, Upload video to NVR server, Upload video or snapshot to FTP server, Activate external device through digital output

Integration

Unified Solution Fully compatible with ACTi software
GPS Position Manual setting
ONVIF Compliant Yes, Profile S, Profile G
GB28181 Compliant Yes
Web Browser IE 11 or newer, Firefox with VLC, Chrome with VLC, Safari with QuickTime
Auto Firmware Upgrade Yes

Interface

Local Storage MicroSDHC, MicroSDXC memory card slot (card not included)
Digital Input/Output 1/0

General

Power Source PoE Class 2 (IEEE802.3af)
Power Consumption 6.49 W (PoE)
Environmental Casing Weatherproof (IP68), Vandal proof metal casing (IK10), Vibration proof (IEC60571), Built-in dehumidifier
Mount Type Surface, Wall Mount
Dehumidifier Yes
Starting Temperature -40°C ~ 55°C (-40°F ~ 131°F)
Operating Temperature -40°C ~ 55°C (-40°F ~ 131°F)
Approvals CE, FCC, IP68, NEMA 4X, IK10 (metal casing), IEC60571, UL Listed (UL 60950-1)
Warranty 3 Year(s)
Extended Warranty 2 Year(s)

 

Visitors: 424,955